What To Do If Your Water Heater Unexpectedly Stops Working

Make An Appointment

 

 

Do you find yourself looking for advise on No Hot Water — Water Heater Repair?


No Hot Water — Water Heater Repair
Numerous modern-day residences utilize an electrical hot water heater for their heater, as a result of its benefit and also convenience of use. Nonetheless, just like any other electrical home appliances, troubles might arise with its usage, suddenly. It can be truly irritating to get up to a cool shower instead of a hot one or having your bath with water that isn't warm adequate and even too hot. Whatever the instance might be, hot water heater troubles can be quite nerve-racking. Thankfully, we've made a listing of feasible solutions to your hot water heater concerns. There are a number of aspects that might trigger many of these problems, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the primary power supply for safety. Whatever the problem is, getting it dealt with ought to not present too much of an issue if you follow these steps:

 

Call An Expert:


If after changing all damaged parts as well as resetting your temperature, the water heater still isn't working, you may need to speak to a specialist plumber for a specialist point of view. The problem with your heater could be that the cold and hot faucets have been switched or it may be undersized for the amount of hot water required in your house. Whatever the situation may be, an expert plumber would certainly aid address the trouble.

 

Inspect Your Power Supply:


As fundamental as this might seem, it is very needed. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the concern, merely turn it off and on once again. Replace any busted or worn-out fuse. Test the device with power after these modifications to see if it's now functioning.

 

Inspect Your Thermostat:


If your water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to inspect the temperature setups on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open the accessibility panel and also press the red switch for temperature reset over the thermostat. This must help warm the water. Turn the breaker back on as well as examine if the issue has actually been solved.

 

Examine the Heating Element in the Hot Water Heater:


If it's not a power issue, after that try having a look at your burner if it is still functioning. Test each of your burner to be sure the problem isn't with any one of them. If any one of them is damaged, replace that component and then inspect whether the warm water is back on.

 

Final thought


Hot water heater issues are not constantly major. Most of them are due to small issues like a blown fuse or damaged burner. Replacing the damaged parts must suffice. However, if you are still unable to address the issue, give a call to your nearby plumber to come to get it repaired.

 

8 possible reasons why you have no Hot Water

 

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

 

Water Leak

 

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.


Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

 

Gas Heater: Gas Leak

 

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

 

Gas Heater: Pilot Light Problems

 

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.


Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

 

Gas Heater: Faulty Thermocouple

 

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

 

Electric Heater: Breaker Blues

 

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

 

Electric Heater: Reaching The Limit

 

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

 

Electric Heater: Heating Element

 

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

 

Do you like more info about What Would Cause My Electric Water Heater to Stop Working?? Try leaving a review below. We will be delighted to listen to your feelings about this write-up. In hopes that you come back again in the future. Are you aware of another individual who is interested by the niche? Be sure share it. Thanks a bunch for your time. Visit again soon.




Request An Appointment
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “What To Do If Your Water Heater Unexpectedly Stops Working”

Leave a Reply

Gravatar